Skip to content

Measurement Converter

Convert length, area, volume, mass and temperature between metric, imperial and US units, and copy the value into any craft.

A pattern written in inches, a yarn label in metres per 100 grams, a mould volume in fluid ounces and a resin ratio in millilitres: most craft projects involve at least two measurement systems before anything is made. This converter moves a value between metric, imperial and US units in one step, and because it also reports the value in the base unit of that family, a chain of conversions can be checked at a glance.

At a glance

What you enter
What are you converting?, Value to convert, Show the answer in, How many of them
What you get
Converted value, Converted value for the whole order, Value in the base unit of the family, Answer divided by the input, Value in degrees Celsius, Value in degrees Fahrenheit, Length answer in the named unit
Formula shown
Yes, every step, right below your results.
Cost and privacy
Free, no account needed, and nothing you type is stored.

See worked examples โ†“ Read the FAQ โ†“ Share this calculator โ†“

What are you converting?

The number you have. A negative value is only meaningful for temperature.

Show the answer in

Only used for area, volume, mass and temperature. For a length conversion the answer is the unit named in the pair above, so leave this on square metres.

For a repeat order: how many pieces, sheets or lengths at the converted size.

Reset

Results are estimates for general information only, always verify with a professional or official source before acting on them.

How to use the Measurement Converter

  1. 1 Enter What are you converting?
  2. 2 Enter Value to convert, The number you have. A negative value is only meaningful for temperature.
  3. 3 Enter Show the answer in, Only used for area, volume, mass and temperature. For a length conversion the answer is the unit named in the pair above, so leave this on square metres.
  4. 4 Enter How many of them, For a repeat order: how many pieces, sheets or lengths at the converted size.
  5. 5 Press Calculate. You get Converted value, Converted value for the whole order, Value in the base unit of the family, Answer divided by the input, Value in degrees Celsius, Value in degrees Fahrenheit, Length answer in the named unit, and every intermediate step stays visible under "How is this calculated?"
  6. 6 Change one number at a time to see what moves the result, that is usually the most useful thing a calculator can tell you.

Worked examples

Real numbers run through this calculator. Open any example to load it into the form above and change it.

Twelve inches in centimetres

A pattern measurement converted for a metric ruler.

You enter

What are you converting?
1
Value to convert
12
Show the answer in
1
How many of them
1

You get

Converted value
30.48
Converted value for the whole order
30.48
Value in the base unit of the family
0.30
Answer divided by the input
2.54
Value in degrees Celsius
0.00 degC
Value in degrees Fahrenheit
0.00 degF
Length answer in the named unit
30.48

A factor of 2.54 exactly, so 30.48 centimetres, which is also one foot or 0.3048 metres.

Open this example in the calculator โ†’

A hundred square feet of fabric

An upholstery quantity converted for a metric supplier.

You enter

What are you converting?
7
Value to convert
100
Show the answer in
1
How many of them
1

You get

Converted value
9.29
Converted value for the whole order
9.29
Value in the base unit of the family
9.29
Answer divided by the input
0.09
Value in degrees Celsius
0.00 degC
Value in degrees Fahrenheit
0.00 degF
Length answer in the named unit
62.14

9.29 square metres. Note the base value is in square metres, which is the cross check against the size of the job.

Open this example in the calculator โ†’

A resin pour measured in US fluid ounces

Thirty two fluid ounces converted to millilitres.

You enter

What are you converting?
10
Value to convert
32
Show the answer in
3
How many of them
1

You get

Converted value
0.95
Converted value for the whole order
0.95
Value in the base unit of the family
0.95
Answer divided by the input
0.03
Value in degrees Celsius
0.00 degC
Value in degrees Fahrenheit
0.00 degF
Length answer in the named unit
19.88

946.4 millilitres, which is a US quart. An imperial quart would be 1136 millilitres, so the origin of the recipe matters.

Open this example in the calculator โ†’

Frequently asked questions

How many centimetres is 12 inches?
About 30.48 centimetres, because one inch is exactly 2.54 centimetres. Twelve inches is one foot, which is 30.48 centimetres or 0.3048 metres. For a fabric or board order, convert the finished dimension rather than the pattern dimension, and remember that a pattern usually includes a seam or trim allowance that is already in the original unit.
How do I convert square feet to square metres?
Multiply by 0.092903. So 100 square feet is 9.29 square metres, and 10 square feet is 0.93. The mistake to avoid is converting the length and then squaring the wrong number: a foot is 0.3048 metres, and 0.3048 squared is 0.0929. If a flooring or fabric order that looked right turns out ten times too big or too small, this is almost always the reason.
Is a US fluid ounce the same as an imperial fluid ounce?
No, and the difference is about four percent. A US fluid ounce is 29.5735 millilitres and an imperial fluid ounce is 28.4131 millilitres, so an American recipe measured in ounces gives slightly more volume than a British one. The gap grows with the larger units: a US pint is 473 millilitres and an imperial pint is 568. In a candle, resin or soap pour, that is the difference between a full mould and a short one.
How many grams is an ounce of yarn?
One ounce is 28.3495 grams, so a two ounce ball is 56.7 grams and a 3.5 ounce skein is 99.2 grams, which is why 100 gram balls are so common. The weight is only half the label though: yarn also has a length, and two 100 gram balls of different weights of yarn have very different yardage. Convert the weight and the length together before substituting one yarn for another.
How do I convert Celsius to Fahrenheit?
Multiply by nine, divide by five, then add thirty two. So 180 Celsius is 356 Fahrenheit and 100 Celsius is 212. The reverse is to subtract thirty two, multiply by five and divide by nine. Use a converted temperature as a cross check only: for an oven, a kiln, a wax melting point or any process where the temperature matters, follow the figure from the manufacturer or the process data rather than an approximation.

More money questions answered โ†’

Share this tool

Send the calculator, or your exact numbers, to whoever needs to see them.

Your browser blocked the clipboard, select the link above and copy it manually.

Embed this calculator on your own site โ†’

We use essential cookies to run this site. Optional partners (advertising and analytics) only load if you accept them. See our Privacy Policy.